Category Archives: Chisels
Stanley FatMax Electricians Chisel 2.14in x 10in CW Guard 4-18-330
Used by electricians for cutting out patrices, this chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and
Faithfull Bevel Edge Butt Chisel 25mm
Faithfull Short blade butt chisels are ideal for precise cutting and paring of joints or for use where access is limited. These chisels feature 110mm long drop forged Chrome Vanadium steel blades with accurately ground bevels. Virtually unbreakable softgrip Polypropylene handles with steel striking caps. The short length bevel edge blade is ideal for cutting
BlueSpot SDS Chisel Set 3Pc 20012
The BlueSpot Tools 3 Piece SDS-plus Chisel Set has been designed for SDS-plus drills with a roto stop function. They have been heat treated for increased strength and durability. Ideal for chasing out, cleaning bricks or breaking. Contents:2 x Flat Chisels : 20mm & 40mm.1 x Point Chisel.
Faithfull Cold Chisel 24in x 34in F0053
Faithfull Cold chisels are made from high quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 600 x 20mm (24 x 3/4 in).
Faithfull Cold Chisel 24in x 1in F0073
Faithfull Cold chisels are made from high quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 600 x 25mm (24 x 1 in).
Faithfull Concrete Point 12in x 14in F0433
The Faithfull Concrete Point is used for bursting concrete and brickwork. Channels in concrete flooring should be marked out with a suitable flat chisel, prior to using concrete point chisel for stock removal. Specification End Type: 6mm Point.Size: 300 x 19mm (12 x 3/4in).
Faithfull F0411 Flooring Chisel 2.14in
The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge. NOT TO BE USED FOR CUTTING BRICKSThe Faithfull FAIEC214 Flooring chisel has the following dimensions:Size: 230 x 57mm (9 x 2.1/4 inch).
Faithfull F0414G Flooring Chisel 2.14 with Grip
The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge. NOT TO BE USED FOR CUTTING BRICKSThe Faithfull FAIEC214PG Flooring chisel is fitted with a sturdy rubber safety grip and has the following
Faithfull F0416 Fluted Plugging Chisel 230mm x 8mm
The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick.The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris.Size: 230 x 5mm (9 x 3/16in).
Faithfull F0418g Fluted Plugging Chisel with Grip 230mm x 5mm
The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick.The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris.Size: 230 x 5mm (9 x 3/16in).Fitted with a plastic guard to protect the users
Faithfull Black Protective Grip 58in
The Faithfull Black Protective Grip is designed to be fitted on to cold chisels, bolsters or flooring chisels. Gives protection to the hand from misdirected hammer blows.To fit size 16mm (5/8 in) shank.
Faithfull Black Protective Grip 34in
The Faithfull Black Protective Grip is designed to be fitted on to cold chisels, bolsters or flooring chisels. Gives protection to the hand from misdirected hammer blows.To fit size 19mm (3/4 in) shank.
Faithfull Black Protective Grip 78in
The Faithfull Black Protective Grip is designed to be fitted on to cold chisels, bolsters or flooring chisels. Gives protection to the hand from misdirected hammer blows.To fit size 22mm (7/8 in) shank.
Faithfull F0476 Scutch Comb Holder 8in x 1in
For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size: 200 x 25mm (8 x 1 in).
Faithfull F0477 Scutch Comb Holder 8in x 1.12in
For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size: 200 x 38mm (8 x 1 1/2 in).
Faithfull Pick Head Only 7lb – Chisel Point
The Faithfull Replacement Solid Eye Navy Pick Head with chisel and point for breaking up concrete or hard ground. NOTE: Head only, handles are sold separately: FAIHWP36/FAIHP36/FAIFGP36.
Faithfull F0393 Brick Bolster 4in with Grip
These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.Fitted with plastic safety grip. Size: 100 x 225mm (4in x 9in).
Faithfull Cold Chisel 12in x 1in with Grip F0068g
Faithfull Cold chisels are made from high quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Fitted with protective grip. Size: 300 x 25mm (12 x 1 in).
Faithfull F0426 Dome Head Chasing Chisel 2in
The Faithfull Dome Head Chasing Chisel is for cutting channels in cement, rendering, plaster, brick and breeze block. Special heat treated dome head with strong hardened blade. Not to be used for levering floorboards. Size: 50mm (2 in).
Faithfull Cold Chisel 18in x 34in F0051
Faithfull Cold chisels are made from high quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 450 x 20mm (18 x 3/4 in).
